 |
Gleason Series "S" Spring-Driven Electric
Cable Reels
Gleason Series "S" Spring-Driven Electric Cable Reels are designed
to be mounted on moving machinery. Electric current flows from
your power source to the current consumer through the cable you
specify. S-Reels utilize self-contained slip ring assemblies which
transfer current to the cable mounted on the rotating spool.
Models for 2 to 36 conductors, 30' to 120' for lift, drag and
stretch applications (200' for retrieve applications)
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Series "SM" Extra-Heavy Duty
Electric Cable Reels
Series "SM" reels are specially designed for steel mill and magnet
service. The heavy 3/8" steel plate L-shaped frame and 1/4" thick
steel spool disks provide added strength. Oversized regreasable
bearings on both sides of the load-bearing spool are standard. All
models are gear drive. The heavy-duty collector assembly, rated at
35, 75, 125 or 200 amps, 600vAC or 550vDC features polished copper
rings for maximum dependability. Models for 2 to 36 conductors,
cable from 30' to 200' depending on application. Also used on
crane magnets.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Series "MMD" Mill Duty Electric
Cable Reels
Built tough to provide dependable Mill Duty service under adverse
conditions. Specially designed to operate reliably and safely, MMD
reels feature "beefed-up" all steel construction, oversized
bearings on both sides of the load bearing spool, and a heavy duty
shaft. Four spool diameters, a wide variety of drum diameters and
either direct or geared drive allow maximum flexibility in
specifying the right reel for your application. Models for 2 to 36
conductors, cable length from 30' to 200'. May also be used for
crane magnet applications.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Series "SHO" & "TMR" Retrieve
Type Electrical Cable Reels
SHO/TMR Series Reels are designed to provide a low cost solution
for long electrical cable horizontal retrieve applications. A
horizontal retrieve application is when the reel is mounted on the
moving equipment and winds or pays-out cable into a tray or other
support. In the SHO series reels, winding torque is provided by
one or more parallel design spring motors. The TMR Series Reels
utilize a small toque motor/gear reducer to drive the spool. Both
SHO and TMR Series Reels are available with either random wrap or
monospiral wrap spools. Gleason SHO/TMR reels have retrieve
capacities of 350 feet of electric cable at a velocity of 150
ft./min and acceleration of 1.0ft./sec/sec.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Cable-Master Reels
Gleason Cable-Master Reels give you more for your money because
they are ruggedly built and their design has been refined over
many years of field use. The have either fully automatic or
ratchet controlled spring rewind and contain all the features
found in any reel in this size range. Standard features include:
rollered cable guide, ratchet lock and 600 volt slip ring.
Available for 3 to 12 conductors, 20' to 70' long cables.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Series "SZ" Hazardous Duty Reels
"SZ" Hazardous Duty Cable Reels have all the features of an "S"
Reel plus an extra heavy slip ring enclosure and
pre-wired/pre-potted junction box. Designed for use in Class I
(groups C & D) and Class II (groups E, F & G, division 1 & 2)
hazardous environments, the direct or gear spring drive reels are
available with 16" to 32" diameter spools. The pre-wired and
pre-potted NEMA 7-9 junction box saves time during installation
because the electrical connections are made in the box, not
directly on the slip ring. Slip rings are available for four to 36
circuits, 35 to 200 amp.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Motor-Driven Pendant Station
Reels
Automatically raise and lower push-button stations for floor
controlled cranes and hoists. Wind and store up to 120' of cable.
Average retrieval speed - 135 fpm (40.5 mpm). Reversible 1800 RPM,
230-460 VAC drive motor. Electro-magnetic brake holds cable in
place when motor is de-energized. Capacities from 2-36 conductor
cables, No. 16 through No. 10 AWG wire size.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Series "WB" Cable Reels without
Slip Rings
Series "WB" Cable Reels are continuous contact reels designed for
applications such as communication where any impedance must be
avoided. Because WB-Reels use one continuous length of cable,
there is no break from current source to consumer and that means
complete preservation of transmission integrity. This transmission
integrity makes WB reels ideal for use with fiber optic cable.
Models available for 30' to 120' of cable.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Vari-Matic Drive Reels
The Gleason VARI-MATIC drive provides a reliable solution to the
challenge of retrieving and unwinding long lengths of valuable
cable at the demanding cycle rates of today's advanced machinery.
Vari-Matic Reels are available with level-wind or monospiral
spools.
Level Wind reels provide best management of long cables and
have demonstrated through years of use to be the safest and most
reliable way to handle long lengths of large cable. By winding a
single layer of cable horizontally on a generous drum diameter,
the cable experiences minimum flexing and is exposed to maximum
cooling, should that be a concern. Equipment speeds can be slow,
moderate or high with equally good performance.
Monospiral reels provide best low reel mounting and are
designed to stack cable in a single, multiple layer vertical
configuration. They are the solution to applications involving
large cables where lateral space may be limited. This narrow spool
design, together with proven VARI-MATIC drive reliability, makes
monospiral reels ideal for service in any demanding environment.
Monospiral reels are available for low, medium or high speed
requirements. The monospiral design allows the reel itself to act
as a cable guide.
sales@pacdist.com Call for a quote (877)696-8062
|
 |
Gleason Welding Cable Reels
Gleason welding reels store up to 85' of arc welding cable. No
more time wasting hand coiling, or hazardous tangled and jumbled
piles of cable. Cable easily unreels...ratchet lock keeps it
extended when in use. To rewind, just tug the cable to release the
ratchet (like a window shade) and walk the rod holder or clamp
back to the reel. Custom designed machined brass collector
provides positive circuit through reel to cable. Lead from welder
to reel is easily installed and held securely in place. Reels are
available with or without cable.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Emergency Vehicle Cable and Hose
Management
When seconds count, rely on Gleason Cable-Master Reels. When the
call comes in, emergency vehicles must be ready to roll, get to
the scene and spring into action. Cable-Master reels mounted
overhead at station provide "off-duty" power to vehicles.
Hose-Master reels keep air brakes charged. Both can be equipped
with sockets which automatically disconnect when the engine
starts. Truck mounted reels provide quick cable deployment at the
scene and can hold up to 90' of cable.
sales@pacdist.com Call for a quote (877)696-8062 |
 |
Gleason Low Profile Level Wind Reels
Direct replacement for existing low profile reels with up to 100'
of cable. Ideal for magnet and hook/rotate crane applications.
Feature easily adjusted, externally mounted springs...no need to
remove cable from spool or disassemble reel to adjust or replace
drive springs. Available with 35, 75, 125 or 200 amp collector.
sales@pacdist.com Call for a quote (877)696-8062 |
