NPPG 256

R

ecessed

Ligh

tin

g

Customers appreciate the ease

of installation, consistent

quality and excellent value that

are the hallmarks of our

recessed line. As with all our

products, the recessed fixtures

meet stringent performance

standards and testing prior to

shipping.

Two standard opening sizes

make selection and installation

easy (4.25-inch O.D. or 6.25-

inch O.D.). This allows

installation of fixtures before

trim ring selection has been

made. Our recessed products

also give you the flexibility to

easily switch trims as lighting

requirements change.

The variety of light sources

make Ruud Lighting recessed

products the perfect choice for

any application. Incandescent,

fluorescent, low-voltage and

HID light sources are offered.

Dimming

Ruud Lighting offers both

Power Line or 0-10 Low

Voltage dimmable ballasts on

recessed fixtures using either a

fluorescent 26-, 32- or 42-watt

triple-tube lamp.

Labor-Saver

™

Architectural

Recessed

This great new addition to our

recessed line offers an 7- or

8-inch aperture and an

innovative mounting system

for suspended ceilings. The RR

Series includes a choice of

compact fluorescent or HID

lamp types providing uniform

light distribution with low

brightness, good lamp-image

cutoff and excellent efficiency.

R7L Low Voltage Fixtures (Page 263)

Built-in thermal protectors

In compliance with the latest

UL standards and the National

Electrical Code, all Ruud

®

housings (except fluorescents)

have a thermal protector that

will turn off the fixture under

conditions that cause

overheating. After the fixture

cools down, the thermal

protector resets itself and will

deactivate the unit again if the

temperature level is exceeded.

Avoid overheating

problems

Do not overlamp. All recessed

manufacturers’ trims carry a UL

label indicating the type and

maximum wattage lamp that

can be used in a trim. Please

follow these recommendations

carefully.

Air tight recessed cans

Recessed downlights can

create open airways between

temperature-controlled rooms

and their uncontrolled attic or

plenum spaces. Our Insulated

Ceiling Air Tight Recessed

Downlights (ICAT Series)

minimize air infiltration and

leakage. This is especially

important in states where codes

require airtight recessed

fixtures. Our ICAT Series is

offered in three popular

models, 4-inch Incandescent

(R4ICAT), 6-inch Incandescent

(R7ICAT) and 6-inch

Fluorescent with 18-watt lamp

(R7FICAT18).

For other projects where direct

contact with insulated ceiling

materials may occur, use the

4-inch Low Voltage

Incandescent (R4LICAT),

6-inch Economy Incandescent

(R7EIC) or 6-inch Incandescent

for remodel projects (R7RIC). If

you choose to use another

housing, be sure the insulation

is at least 3 inches away from

housing and junction box.

Lamp bonus

As a service to our customers,

all Ruud fluorescent and HID

housings are shipped with

the appropriate lamp. This

saves you from having to order

your lamps and allows

simultaneous delivery of both

the housing and lamp. Most

important, this makes Ruud

Recessed Lighting even more

economical.

Lamp listings

Please follow the lamp listings

under each trim very carefully.

There are two common types

of incandescent trims: A lamp

trims and BR or PAR lamp

trims. You should use only

the lamp specified. The wattage

listed is the maximum

allowable for each specific trim.

You may use a lower-wattage

lamp, but not one with a higher

wattage.

Versatile trims

Whatever your application,

general lighting, task lighting,

accent lighting or wall washing,

we have top-quality trims to do

the job. And what we catalog,

we can deliver. Fast!

256

www.ruudlighting.com

NPPG 257

NPPG 257

R4R (120V)

Remodel

R4 (120V)

New Construction

Smaller aperture,

greater flexibility

In planning a downlighting installation,

scale is an important consideration. A

6-inch or 7-inch aperture may be too

large for task lighting in the kitchen or

highlighting of artwork. That’s where

Ruud’s 4-inch mini-recessed housing

and trims are perfect.

For non-insulated ceilings, or where

insulation is at least 3 inches away,

these two housings are the right choice.

New construction and remodel versions

are available, offering a choice of line or

low voltage. Aiming angle is adjustable

up to 30 degrees in low-voltage fixtures.

Each housing type is compact,

occupying almost half the space of

standard recessed units. A black

polyester powder finish protects the

steel housing while enhancing the final

appearance of the fixture installed.

R4/R4R and R4L/R4LR

Features

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

Rigid bar hangers

These rigid bar hangers are for use in

16 inch to 24 inch O.C. wood joist or T-

Bar construction. This design permits

sturdier installations that are less prone

to sagging. Because the recessed fixture

can now slide anywhere along the bar

hanger, they are handy in T-Bar ceilings

where centering of the fixture within the

ceiling panel is desired. One-piece 27-

inch bar hangers (RBH27) are available

where required by code for suspended

ceiling or off-center positioning

installations.

Oversized junction box

The R4 is designed for easy through-

branch circuit wiring. Box cover on the

R4L and R4LR has a snap latch for

quick installation.

5-1/2" height

Allows installation in 2 x 6 wood joist

construction.

4" Incandescent

R Series Order Information

R4R (120V)-Remodel

R4 (120V)-New Construction

R4L (12V)-New Construction

R4LR (12V)-Remodel

Description

Volts Catalog #

New Construction

120 R4

Remodel

120 R4R

New Construction (Low Voltage)

12 R4L

Remodel (Low Voltage)

12 R4LR

Trims

Catalog #

Baffle (R4 & R4R) (50R/PAR20 max.)

RT41*

Baffle (R4L & R4LR) (50MR16BP max.)

RT46*

Reflector (R4 & R4R) (50R/PAR20 max.)

RT40*

Reflector (R4L & R4LR) (50MR16BP max.)

RT45*

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers

RBH27

T-Bar Clips (4) (R4 & R4L only) (use with RBH27) RTBC

Spread Lens (for MR16 trims)

TA081

Linear Spread Lens (for MR16 trims)

TA082

Soft Focus Lens (for MR16 trims)

TA083

Cutoff Baffle (use with RT40 & RT45)

TA084

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 286–287

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

4.375"

5.5"

11.625"

4.39"

5.5"

p la s t e r f ra me

d ime n s ion s :

8 .5 62" L x 6. 886 "W

8.562"

4.375"

5.5"

12.625"

4.39"

5.5"

plaster frame

dimensions:

8.562"L x 6.886"W

10.625"

8.562"

R4LR (12V)

Remodel

R4L (12V)

New Construction

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC

Article 410-66, if insulation is

inadvertently installed above or within

3 inches of fixture.

Labels

Both housings are UL Listed in the U.S.

and Canada for damp locations. The R4

is UL Listed for feed-through wiring; the

R4R for end-of-run wiring. All trims are

UL Listed for damp locations.

R4L/R4LR Features

Power supply

12V, 50VA, magnetic-power supply

is attached to the junction box. It is

thermally protected and accessible from

below the ceiling.

Dimmers

Incandescent fixtures can be dimmed with

standard specification grade dimmers.

Low- voltage fixtures require a dimmer

suitable for a magnetic power supply.

257

www.ruudlighting.com

NPPG 258

NPPG 258

More application options

with 4" ICAT housings

Now you can give your new-

construction customer a choice of

incandescent or low-voltage sources

in a miniature downlight. The small

aperture makes this fixture ideal over

a conference-room table, fireplace

mantle or bathroom vanity area. These

housings are UL Listed for damp

locations and direct burial in insulation.

These models provide airtight

construction, minimizing air infiltration

between temperature-controlled rooms

and attics/plenums.

R4LICAT Features

Power supply

12V, 60VA, electronic power supply. It is

thermally protected and accessible from

below the ceiling.

Dimmers

Incandescent fixtures can be dimmed

with standard specification grade

dimmers. Low-voltage fixtures require a

dimmer suitable for dimming electronic

power supplies.

R4ICAT and R4LICAT

Features

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can now slide anywhere

along the bar hanger, they are handy in

T-Bar ceilings where centering of the

fixture within the ceiling panel is

desired. One-piece 27-inch bar hangers

(RBH27) are available where required by

code for suspended ceiling or off-center

positioning installations.

Double housing

Square galvanized housing surrounds a

round galvanized housing, providing an

excellent thermal barrier.

7-1/2" height

Allows installation in 2 x 8 wood joist

construction.

Labels

Both housings are UL Listed in the US

and Canada for damp locations, direct

burial in insulation and feed-through

wiring. All trims are UL Listed for damp

locations.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used.

4" Incandescent ICAT

R Series Order Information

Description

Volts Catalog #

New Construction

120 R4ICAT

New Construction (Low Voltage)

12 R4LICAT

Trims

Catalog #

Baffle (R4ICAT) (50R/PAR20 max.)

RT41*

Baffle (R4LICAT) (50MR16BP max.)

RT46*

Reflector (R4ICAT) (50R/PAR20 max.)

RT40*

Reflector (R4LICAT) (50MR16BP max.)

RT45*

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers

RBH27

T-Bar Clips (4) (use with RBH27)

RTBC

Spread Lens (R4LICAT only)

TA081

Linear Spread Lens (R4LICAT only)

TA082

Soft Focus Lens (R4LICAT only)

TA083

Cutoff Baffle (R4LICAT only)

TA084

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 286–287

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

4.39"

7.5"

plaster frame

dimensions:

11.25"L x 7.75"W

11.25"

9.0"

R4ICAT New Construction

4.39"

7.5"

plaster frame

dimensions:

13.5" L x 13.625" W

13.5"

10.375"

R4LICAT New Construction

258

www.ruudlighting.com

NPPG 259

NPPG 259

Description

Volts Catalog #

New Construction

120 R7

Remodel (supplied with 4 remodel clips) 120 R7R

Trims

Catalog #

Adjustable Eyeball (50R/PAR20 max.)

RT22

Adjustable Eyeball (75BR/PAR30 max.)

RT23

Adjustable Eyeball (regressed) (75BR/PAR30 max.) RT223*

Albalite Lens (60A19 max.)

RT25WH

Albalite Lens (regressed) (60A19 max.)

RT225*

Aluminum Baffle (75BR/PAR30 max.)

RT26*

Baffle (150BR40/PAR38 max.)

RT17*

Baffle (75BR/PAR30 max.)

RT16*

Baffle w/Clear Reflector (150BR40/PAR30 max.) RT18*

Drop Opal Lens (glass) (60A19 max.)

RT14WH

Drop Opal Lens (plastic) (60A19 max.)(Wet Listed) RT13WH

Drop Opal Lens (plastic) (40A19 max.)(Wet Listed) RT113WH

Drop Opal Lens (regressed) (60A19 max.)

RT214*

Fresnel Lens (60A19 max.)

RT15WH

Fresnel Lens (regressed) (60A19 max.)

RT215*

Open (150BR40/PAR38 max.)

RT12WH

Open (50R/PAR20 max.)

RT10WH

Open (75BR/PAR30 max.)

RT11WH

Reflector-A Lamp (150A21 max.)

RT19*

Reflector-R Lamp (75BR/PAR30 max.)

RT20*

Track Adaptor

RT400

Wall Wash/Downlight (150A21 max.)

RT31*

Wall Wash/Scoop (60A19 max.)

RT21

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers (R7 only)

RBH27

T-Bar Clips (4) (R7 only) (use with RBH27)

RTBC

Internal Trim Reflector (use with RT13, RT14, RT15, RT25) RITR

Oversize Metal Trim Ring (7-7/8" o.d.)

ROTR

(Not for use with RT18)

Remodel Clips (4) (R7 only)

RRC

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold),

BK (Specular Black)

Baffles Color Code: WH (White), BK (Black)

Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 286–287

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

Labels

Both housings are UL Listed in the US

and Canada for damp locations or wet

locations when used with RT13 or

RT113 style trims. The R7 is UL Listed

for feed-through wiring; the R7R for

end-of-run wiring.

Superb color rendering

Despite new developments in

fluorescent and HID downlights,

incandescent fixtures remain the most

popular choice in recessed lighting.

Incandescent light sources provide

unmatched color rendering properties

and control. Plus, whether it’s an A, a

BR, a PAR or an ER, an incandescent

lamp is easy to install, and available in

many wattages.

Halogen lamps are an

economical alternative

If your customers like incandescent

lighting but are concerned about energy

costs, consider halogen PAR lamps, as

well as the TB19, the halogen lamp that

can be substituted for the A19. Tungsten

halogen lamps produce a “whiter" light

that enhances merchandise and decor

with greater energy efficiency. All lamps

for this housing are sold separately;

please refer to pages 294 to 296.

R7 Features

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

Oversized junction box

R7 designed for easy through-branch

circuit wiring. Eight No.12 (75 degrees

C) conductors permitted in box. The

R7R is designed for end-of-run wiring.

Rigid bar hangers

These rigid bar hangers are for use in

16 inch to 24 inch O.C. wood joist or T-

Bar construction. This design permits

sturdier installations that are less prone

to sagging. Because the recessed fixture

can now slide anywhere along the bar

hanger, they are handy in T-Bar ceilings

where centering of the fixture within the

ceiling panel is desired. One-piece 27-

inch bar hangers (RBH27) are available

where required by code for suspended

ceiling or off-center positioning

installations.

Versatile plaster frame

Adaptable to new or existing ceilings.

For existing ceilings, remove bar

hangers and use RRC Remodel Clips.

R7 and R7R Features

Adjustable socket

Socket plate is adjustable as required

for different lamps and trims.

7-1/2" height

Housings can be installed in 2 x 8

wood joist construction.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC Article

410-66, if insulation is inadvertently

installed above or within 3 inches of

fixture.

Dimmers

Standard specification grade

incandescent dimmers can be used.

6" Incandescent

R Series Order Information

R7 New Construction

R7R Remodel

R7R

Remodel

R7

New Construction

6.375"

7.5"

6.75"

6.43"

7.5"

plaster frame

dimensions:

10.5"L x 7.25"W

259

www.ruudlighting.com

NPPG 260

NPPG 260

Your ‘tight fit’ solution

Faced with 2 x 6 joist construction or

cramped for room near roof eaves. No

problem. Just specify the Ruud

®

R7SH,

our incandescent shallow housing.

Measuring just 5-1/2 inch in height, the

R7SH has the same features as the R7

but can easily be installed in 2 x 6

wood joist construction.

R7SH Features

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

Rigid bar hangers

These rigid bar hangers are for use in

16 inch to 24 inch O.C. wood joist or T-

Bar construction. This design permits

sturdier installations that are less prone

to sagging. Because the recessed fixture

can now slide anywhere along the bar

hanger, they are handy in T-Bar ceilings

where centering of the fixture within the

ceiling panel is desired. One-piece 27-

inch bar hangers (RBH27) are available

where required by code for suspended

ceiling or off-center positioning

installations.

Oversized junction box

Designed for easy through-branch circuit

wiring. Eight No.12 (75°C) conductors

permitted in box. The R7SHR is designed

for end-of-run wiring.

Versatile plaster frame

Adaptable to new or existing ceilings.

For existing ceilings, remove bar

hangers and use RRC Remodel Clips.

R7SH and R7SHR Features

Adjustable socket

Socket plate is adjustable as required

for different lamps and trims.

5-1/2" height

Housings can be installed in 2 x 6

wood joist construction.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC

Article 410-66, if insulation is

inadvertently installed above or within 3

inches of fixture.

Dimmers

Standard specification grade

incandescent dimmers can be used.

Labels

Both housings are UL Listed in the US

and Canada for damp locations or wet

locations when used with RT13 or

RT113 style trims. The R7SH is UL

Listed for feed-through wiring; the

R7SHR for end-of-run wiring.

6" Incandescent Shallow

R Series Order Information

R7SH New Construction

R7SHR Remodel

R7SHR

Remodel

R7SH

New Construction

6.375"

5.5"

6.75"

6.43"

5.5"

plaster frame

dimensions:

10.5"L x 7.25"W

Description

Volts Catalog #

New Construction

120 R7SH

Remodel (supplied with 4 remodel clips) 120 R7SHR

Trims

Catalog #

Adjustable Eyeball (50R/PAR20 max.)

RT22

Adjustable Eyeball (75BR/PAR30 max.)

RT23

Albalite Lens (60A19 max.)

RT25WH

Aluminum Baffle (75BR/PAR30 max.)

RT26*

Drop Opal Lens (glass) (60A19 max.)

RT14WH

Drop Opal Lens (plastic) (60A19 max.) (Wet Listed) RT13WH

Fresnel Lens (60A19 max.)

RT15WH

Open (50R/PAR20 max.)

RT10WH

Open (75BR/PAR30 max.)

RT11WH

Reflector-R Lamp (75PAR30 max.)

RT27*

Track Adaptor

RT400

Wall Wash/Scoop (60A19 max.)

RT21

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers (R7SH only)

RBH27

T-Bar Clips (4) (R7SH only) (use with RBH27) RTBC

Internal Trim Reflector (use with RT13, RT14, RT15, RT25) RITR

Oversize Metal Trim Ring (7-7/8" o.d.)

ROTR

Remodel Clips (4) (R7SH only)

RRC

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 286–287

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

260

www.ruudlighting.com

NPPG 261

NPPG 261

R Series Order Information

Corrosion-resistant

Can, plaster frame and junction box

are constructed of galvanized steel.

Labels

Both housings are suitable for direct

contact with thermal insulation and are

UL Listed in the US and Canada for

damp locations or wet locations when

used with RT113 style trims.

Economy housing allows

more economical recessed

lighting installations

When economics override every other

concern, you can offer the sophisticated

effects of downlighting to your

insulated-ceiling customers. Ruud

Lighting again provides the solution

with these two recessed housings. With

the R7EIC designed for new

construction, and the R7RIC perfect for

remodels, every insulated ceiling is a

candidate for recessed lighting, even on

the tightest budget. Both housings are

UL Listed for direct contact with ceiling

insulation. Ten trim possibilities

represent both BR/PAR and A lamps.

This selection, while downsized from the

standard IC offering, still gives you a

choice of trim appearances.

R7EIC Features

Adjustable housing

Adjusts up to 1-3/8 inch in plaster

frame to accommodate different ceiling

thicknesses.

NOTE: Socket is not adjustable.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight No.12

(90°C) branch circuit conductors

permitted in junction box.

Rigid Bar Hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can now slide anywhere

along the bar hanger, they are handy in

T-Bar ceilings where centering of the

fixture within the ceiling panel is

desired. One-piece 27 inch bar hangers

(RBH27) are available where required by

code for suspended ceiling or off-center

positioning installations.

Versatile plaster frame

Adaptable to new or existing ceilings.

For existing ceilings, remove bar

hangers and use RRC Remodel Clips.

R7EIC and R7RIC Features

7-1/2 inch height

Housings can be installed in 2 x 8

wood joist construction.

NOTE: Socket is not adjustable.

Thermal protector

Protects fixtures from overheating

if incorrect lamp is used.

Dimmers

Standard specification grade

incandescent dimmers can be used.

6" Incandescent IC Economy

R7EIC New Construction

R7RIC Remodel

R7RIC

Remodel

R7EIC

New Construction

6.375"

7.5"

6.75"

6.43"

7.5"

plaster frame

dimensions:

10.5"L x 7.25"W

Description

Volts Catalog #

New Construction

120 R7EIC

Remodel (supplied with 4 remodel clips) 120 R7RIC

Trims

Catalog #

Adjustable Eyeball (50R/PAR20 max.)

RT22

Adjustable Eyeball (75BR/PAR30 max.) (Long neck) RT23

Albalite Lens (60A19 max.)

RT125

Aluminum Baffle (50PAR30 max.)

RT26*

Drop Opal Lens (glass) (40A19 max.)

RT114

Drop Opal Lens (plastic) (40A19 max.)(Wet Listed) RT113WH

Fresnel Lens (40A19 max.)

RT115

Open (65WBR30 max.)

RT111

Reflector (40A19 max.)

RT30*

Reflector-R Lamp (50PAR30 max.)

RT120*

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers (R7EIC only)

RBH27

T-Bar Clips (4) (R7EIC only) (use with RBH27) RTBC

Oversize Metal Trim Ring (7-7/8" o.d.)

ROTR

Remodel Clips (4) (R7EIC only)

RRC

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold),

BK (Specular Black)

Baffles Color Code: WH (White), BK (Black)

Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 286–287

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

261

www.ruudlighting.com

NPPG 262

NPPG 262

6" Incandescent ICAT

R Series Order Information

Downlighting

enhances any area

Almost every hallway or room,

regardless of architectural style, can

benefit from well-planned, decorative

downlighting. Ruud

®

downlights offer

you long life at low prices.

In areas where insulation is not present,

choose the R7 (page 267). It also can be

used with insulation, if the insulation is

not above the housing and is kept 3

inches away.

The R7ICAT is airtight

Recessed downlights can create open

airways between temperature-controlled

rooms and their uncontrolled attic or

plenum spaces. Our new Insulated

Ceiling Air Tight Recessed Downlight

(R7ICAT) minimizes air infiltration and

leakage. This is especially useful in

states with codes requiring airtight

recessed fixtures.

Features

Double housing

Square galvanized housing surrounds a

round galvanized housing, providing an

excellent thermal barrier.

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

NOTE: Socket is not adjustable.

Corrosion-resistant

Can, plaster frame and junction box are

constructed of zinc-plated steel.

7-1/2 inch height

Allows installation in 2 x 8 wood joist

construction.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight

No.12 (90°C) branch-circuit conductors

permitted in junction box.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can now slide anywhere

along the bar hanger, they are handy in

T-Bar ceilings where centering of the

fixture within the ceiling panel is

desired. One-piece 27- inch bar hangers

(RBH27) are available where required by

code for suspended ceiling or off-center

positioning installations.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used.

Dimmers

Standard specification grade

incandescent dimmers can be used.

Labels

Housing is UL Listed in the US and

Canada for damp locations, direct burial

in insulation and feed-through wiring.

When used with RT113 trim, luminare is

listed for damp location use.

Description

Volts Catalog #

Insulated Ceiling-New Construction

120 R7ICAT

Trims

Catalog #

Adjustable Eyeball (50R/PAR20 max.)

RT22

Adjustable Eyeball (75BR/PAR30 max.)(Long Neck) RT23

Adjustable Eyeball (regressed) (75BR/PAR30 max.) RT223*

(Long Neck)

Albalite Lens (60A19 max.)

RT125

Albalite lens (regressed) (40A19 max.)

RT325*

Aluminum Baffle (50BR/PAR30 max.) (Long Neck) RT26*

Baffle (75PAR38 max.)

RT17*

Baffle (50PAR30 max.) (Long Neck)

RT16*

Baffle w/Clear Reflector (60A19 max.)

RT118*

Drop Opal Lens (glass) (60A19 max.)

RT114

Drop Opal Lens (plastic) (60A19 max.) Wet listed RT113WH

Drop Opal Lens (regressed) (40A19 max.)

RT314*

Fresnel Lens (60A19 max.)

RT115

Fresnel Lens (regressed) (40A19 max.)

RT315*

Open (75/PAR38 max.)

RT12WH

Open (75BR/PAR30 max.)

RT111

Reflector-R Lamp (75BR/PAR30 max.)

RT120*

Track Adaptor

RT400

Wall Wash/Scoop (40A19 max.)

RT121

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers

RBH27

T-Bar Clips (4) (use with RBH27)

RTBC

Oversize Metal Trim Ring (7-7/8" o.d.)

ROTR

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold),

BK (Specular Black)

Baffles Color Code: WH (White), BK (Black)

Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 286–287

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

6.43"

7.5"

plaster frame

dimensions:

11.5"L x 8.187"W

8.5"

R7ICAT Insulated Ceiling

262

www.ruudlighting.com

NPPG 263

NPPG 263

263

R Series Order Information

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC

Article 410-66, if insulation is

inadvertently installed above or within 3

inches of fixture.

Labels

Both housings are UL Listed in the US

and Canada for damp locations. The

R7L is UL Listed for feed-through

wiring; the R7LR for end-of-run wiring.

Dimmers

For noise- and trouble-free dimming

installation, use only specification-

grade dimmers suitable for dimming

electronic power supplies.

More intensity

for less energy

If you want a highly controlled beam of

light that cuts through ambient light…

that enhances merchandise displays…

that accents art objects…that highlights

architectural detail… your project calls

for low-voltage recessed fixtures.

Operating at 12 volts, stepped down from

120 or 277 volts, Ruud

®

Low Voltage

Recessed luminaires offer you the choice

of MR16 or PAR36 light sources. Both

lamps are available in a wide range of

intensities and beam spreads and will

help reduce energy consumption.

Because they produce a higher beam

intensity per watt than standard voltage

lamps, you use less wattage to light a

specific object. As much as 66 percent

less! This also results in other savings,

such as smaller panel boards, fewer

circuit breakers, lighter gauge wire,

smaller conduit and fewer switches. So

save your customers energy and money.

Install Ruud Low Voltage Recessed

fixtures.

R7L Features

Adjustable housing

Adjusts up to 1-3/8 inch in plaster

frame to accommodate different ceiling

thicknesses.

Airtight housing available. Consult

factory.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight No.12

(90°C) conductors permitted in box. The

R7LR is designed for end-of-run wiring.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can rigid bar hangers

now slide anywhere along the bar

hanger, they are handy in T-Bar ceilings

where centering of the fixture within the

ceiling panel is desired. One-piece 27

inch bar hangers (RBH27) are available

where required by code for suspended

ceiling or off-center positioning

installations.

Versatile plaster frame

Adaptable to new or existing ceilings.

For existing ceilings, remove bar

hangers and use RRC Remodel Clips.

R7L and R7LR Features

Power supply

12V, 60VA, solid-state electronic power

supply is attached to the junction box.

It is thermally protected and accessible

from below the ceiling.

7-1/2" height

Housings can be installed in 2 x 8

wood joist construction.

6" Low Voltage

R7L New Construction

R7LR Remodel

R7L

New Construction

R7LR

Remodel

7.5"

6.43"

plaster frame

dimensions:

10.5"L x 7.25"W

So cket

Ad aptor

7.5"

6.375"

6.75"

S ocket

A dapt or

plaster frame

dimensions:

13.125"L x 6.437"W

Description

Volts Catalog #

New Construction

120 R7L

New Construction

277 R7L-2

Remodel (supplied with 4 remodel clips) 120 R7LR

Trims

Catalog #

Adjustable Eyeball (50MR16BP max.)

RT52*

Adjustable Gimbal Ring in Reflector (50PAR36 max.) RT55*

Adjustable Gimbal Ring in Baffle (50PAR36 max.) RT56*

Adjustable Slot Aperture (50MR16BP max.)

RT53

Adjustable Spot (50MR16BP max.)

RT50*

Pin Hole Baffle (50MR16BP max.)

RT54*

Reflector (50MR16BP max.)

RT51*

*Specify color

NOTE: A socket adaptor is included with all Low Voltage trims.

Accessories

Catalog #

Pair 27" Flat Bar Hangers

RBH27

T-Bar Clips (4) (R7L only) (use with RBH27)

RTBC

Oversize Metal Trim Ring (7-7/8" o.d.)

ROTR

Remodel Clips (4)

RRC

Spread Lens (for MR16 trims)

TA081

Linear Spread Lens (for MR16 trims)

TA082

Soft Focus Lens (for MR16 trims)

TA083

Cutoff Baffle (use with RT51)

TA084

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold),

BK (Specular Black)

Baffles Color Code: WH (White), BK (Black)

Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 286–287

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

www.ruudlighting.com

NPPG 264

NPPG 264

8" Labor-Saver–Fluorescent

Lamp

Included!

RR Series Order Information

Wattage

Lamp/Type Description Volts Catalog #

(2) 26W Triple Tube Fluorescent 120-277V RR8DGF26-U

(a)

(2) 32W Triple Tube Fluorescent 120-277V RR8DGF32-U

(a)

(2) 42W Triple Tube Fluorescent 120-277V RR8DGF42-U

(a)

(a)

Specify Reflector/ Trim color:

AF

= Clear Anodized

GF

= Champagne Gold

AW

= Clear Anodized (white flange)

GW

= Champagne Gold (white flange)

Options: (Factory-installed) (commercial use only) Change Add to

Description

Suffix To Catalog #

0-10V Electronic Dimming Ballast (120 or 277V)

A

Power Line Electronic Dimming Ballast (120 or 277V) 1 or 2 P

Lutron Hi-Lume

®

Dimming Ballast (32W max.) (120 or 277V) 1 or 2 L

Specification-grade 8-inch aperture,

low-profile recessed downlight

designed for twin 26-, 32-, or 42-watt

triple-tube fluorescent lamp. The one-

piece optical assembly provides even

light distribution with low brightness,

good efficiency and excellent lamp-

image cutoff.

Features

Horizontal twin 26-, 32- or 42-watt

triple-tube compact fluorescent lamps

driven by microprocessor-controlled

electronic ballast that automatically

senses supply voltage 120 through

277-volt and lamp wattage. Ballast is

Class P thermal-protected and senses

end of lamp life. Fixture weight is

5.75 lbs.

120 or 277V Power Line

Electronic Dimming*

ballast option

Operates from 2-wire compatible

dimmers. 100% to 5% continuous

dimming. Lamp ignition at any light

output setting.

120 or 277V Low Voltage

Dimming* ballast option

Operates from compatible 0-10V DC

controllers on Class 1 or Class 2 low

voltage systems. 100% to 5%

continuous dimming. Lamp ignition at

any lighting output setting.

NOTE: For dimming option, see page

273 for required control accessories.

Lamp Included

The 4-pin, 3500K fluorescent lamps are

including in the housing price and are

shipped with the fixture.

Reflector/Trim

Low-brightness, spun Alzak

®

aluminum,

one-piece reflector 0.06-inch thick with

polished radius and continuous self-

flange. Low iridescence, specular in

clear finish or Champagne Gold finish

color available. A white trim flange also

is available.

Housing

Housing is furnished with adjustable

yoke for flush or drop ceilings up to

5/8-inch.

Mounting

Designed to accommodate most

suspended ceiling systems. Mounts

directly to the main runners of the

standard grid, concealed T or slot grid

ceiling systems spaced 24-inches apart.

Thermal Protection

Fixture meets NEC Article 410-66

requirements.

Labels

UL Listed in the US and Canada for

damp locations and feed-through

wiring.

1 80

15 0

1 20

9 0

60

30

0

1 50 0

1 00 0

5 00

2 4. 0 "

( 61 0 mm )

9. 0 "

( 2 2 9 mm)

7. 2 "

( 1 83 mm)

(2) 42W Fluorescent

6,400 Lumens

S/MH = 1.5

SC = 1.4

Efficiency = 56.7%

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .68 .68 .68 .68 .66 .66 .66 .66 .63 .63 .63 .60 .60 .60 58 .58 .58 .57

1 .64 .62 .60 .59 .62 .61 .59 .58 .58 .57 .56 .56 .55 .55 .54 .54 .53 .52

2 .60 .57 .55 .52 .59 .56 .54 .52 .54 .52 .51 .53 .51 .50 .51 .50 .48 .48

3 .56 .52 .49 .47 .55 .51 .49 .46 .50 .48 .45 .49 .47 .45 .47 .46 .44 .43

4 .53 .48 .45 .42 .52 .48 .44 .42 .46 .43 .41 .45 .43 .41 .44 .42 .40 .39

5 .50 .44 .40 .37 .49 .44 .40 .37 .42 .39 .37 .41 .39 .37 .41 .38 .36 .35

6 .46 .40 .36 .34 .45 .40 .36 .33 .39 .36 .33 .38 .35 .33 .37 .35 .33 .32

7 .43 .37 .33 .30 .42 .36 .32 .30 .35 .32 .30 .35 .32 .29 .34 .31 .29 .28

8 .40 .33 .29 .27 .39 .33 .29 .26 .32 .29 .26 .32 .29 .26 .31 .28 .26 .25

9 .37 .31 .26 .24 .36 .30 .26 .24 .30 .26 .23 .29 .26 .23 .28 .25 .23 .22

10 .34 .28 .24 .21 .34 .27 .24 .21 .27 .23 .21 .26 .23 .21 .26 .23 .21 .20

Clear Anodized Reflector

Champagne Gold Reflector

264

www.ruudlighting.com

NPPG 265

265

7" Labor-Saver–HID

Lamp

Included!

RR Series Order Information

Wattage

Electronic Ballast

Magnetic Ballast

Lamp/Type Volts Catalog #

Catalog#

50W MH 120V RR7DA405-1

(a)

RR7DB405-1

(a)

50W MH 277V RR7DA405-2

(a)

RR7DB405-2

(a)

70W MH 120V RR7DA407-1

(a)

RR7DB407-1

(a)

70W MH 277V RR7DA407-2

(a)

RR7DB407-2

(a)

100W MH 120V RR7DA410-1

(a)

RR7DB410-1

(a)

100W MH 277V RR7DA410-2

(a)

RR7DB410-2

(a)

150W PSMH 120V RR7DA615-1

(a)

—

150W PSMH 277V RR7DA615-2

(a)

—

(a)

Specify Reflector/ Trim color:

AF

= Clear Anodized

GF

= Champagne Gold

AW

= Clear Anodized (white flange)

GW

= Champagne Gold (white flange)

Specification-grade 7-inch aperture,

low-profile recessed downlight

designed for 50-, 70-, 100- or 150-watt

metal halide lamp. The one-piece

optical assembly provides even light

distribution with low brightness, good

efficiency and excellent lamp-image

cutoff.

Features

50-, 70-, 100- or 150-watt metal halide

lamp in 120 or 277 volts.

Electronic Ballast fixture weights:

50-, 70- and 100-watt is 6.5 lbs.

150-watt is 7.5 lbs.

Magnetic ballast fixture weights:

50-watt is 10.25 lbs.

70-watt is 11.25 lbs.

100-watt is 11.75 lbs.

Ballast

High-efficiency, light-weight electronic

ballast standard. Magnetic ballast also

available.

Lamp Included

The appropriate coated, open-rated

metal halide lamp is included in the

housing price and is shipped with

fixture.

Reflector/Trim

Low-brightness, spun Alzak

®

aluminum,

one-piece reflector 0.06-inch thick with

polished radius and continuous self-

flange. Specular clear finish or

Champagne Gold finish color available.

A white trim flange also is available.

Housing

Housing is furnished with adjustable

yoke for flush or drop ceilings up to

1/2-inch.

Mounting

Designed to accommodate most

suspended ceiling systems. Mounts

directly to the main runners of the

standard grid, concealed T or slot grid

ceiling systems spaced 24 inches apart.

Thermal Protector

Protects fixture from overheating per

NEC Article 410-66.

Labels

UL Listed in the US and Canada for

damp locations and feed-through

wiring.

1500

3000

4500

0

180

120

150

90

60

30

150W MH Coated

12,600 Lumens

S/MH = 1.2

SC = 1.2

Efficiency = 71.3%

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .84 .84 .84 .82 .82 .82 .82 .82 .79 .79 .79 .75 .75 .75 .72 .72 .72 .71

1 .80 .78 .76 .74 .78 .76 .74 .73 .73 .72 .71 .71 .69 .68 ..68 .67 .66 .65

2 .75 .72 .69 .66 .74 .70 .68 .65 .68 .66 .64 .66 .64 .62 .64 .63 .61 .60

3 .71 .66 .62 .59 .69 .65 .61 .58 .63 .60 .57 .61 .59 .56 .60 .58 .56 .54

4 .67 .61 .56 .53 .65 .60 .56 .63 .58 .55 .52 .57 .54 .51 .55 .53 .51 .50

5 .62 .56 .51 .48 .61 .55 .51 .47 .54 .50 47 .52 .49 .46 .51 .48 .46 .45

6 .58 .51 .46 .43 .57 .50 .46 .42 .49 .45 .42 .48 .45 .42 .47 .44 .41 .40

7 .54 46 .41 .38 .53 .46 .41 .38 .45 .41 .38 .44 .40 .37 .43 .40 .37 .36

8 .50 .42 .37 .34 .49 .42 .37 .34 .41 .37 .34 .40 .36 .33 .39 .36 .33 .32

9 .47 .38 .33 .30 .46 .38 .33 .30 .37 .33 .30 .37 32 .30 .36 .32 .29 .28

10 .43 .35 .30 .27 .42 .35 .30 .27 .34 .29 .26 .33 .29 .26 .33 .29 .26 .25

Clear Anodized Reflector

Champagne Gold Reflector

10. 5"

(2 46 mm)

8 .0 "

(2 03 mm)

24 .0 " (6 10 mm)

NPPG 265

RR7DA (Electronic)

RR7DB (Magnetic)

10 .5 "

( 267 mm )

8. 0"

(203 m m)

24. 0"

(6 10 mm)

www.ruudlighting.com

NPPG 266

Wattage/

Lamp Type Description

Volts Catalog #

(1)13W Fluorescent New Construction

120 R7F-1

Quad Tube Remodel

(supplied with 4 remodel clips)

120 R7FR-1

New Construction

277 R7F-2

Remodel

(supplied with 4 remodel clips)

277 R7FR-2

Trims

Catalog #

Albalite Lens

RT25WH

Albalite Lens (regressed)

RT225*

Baffle w/Clear Reflector

RT18*

Drop Opal Lens (glass)

RT14WH

Drop Opal Lens (plastic)(Wet Listed)

RT13WH

Drop Opal Lens (regressed)

RT214*

Fresnel Lens

RT15WH

Fresnel Lens (regressed)

RT215*

Reflector

RT19F*

Wall Wash/Downlight

RT31*

Wall Wash/Scoop

RT21

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers (R7F only)

RBH27

T-Bar Clips (4) (R7F only) (use with RBH27)

RTBC

Internal Trim Reflector

RITR

(use with RT13, RT14, RT15, RT25)

Oversize Metal Trim Ring (7-7/8" o.d.)

ROTR

(Not for use with RT18)

Remodel Clips (4) (R7F only)

RRC

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

R7F and R7FR Features

High power factor ballast

Ballast reduces line current and allows

more fixtures on an individual circuit.

Ballast is accessible from below the

ceiling and is Class P thermal protected.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC Article

410-66, if insulation is inadvertently

installed above or within 3 inches of

fixture.

Minimum starting

temperature

32°F (0°C) in open fixtures.

Temperature is lower for enclosed

fixtures.

10 times longer-lasting

than incandescent lamps

Whether you call it a Double Deluxe, a

PLC, a Double Twin Tube or simply a

Quad, the compact fluorescent light is a

remarkable light source. With an

average rated life of 10,000 hours, it will

last 10 times longer than an ordinary

A19 incandescent lamp, while using

only one-fourth of the electricity.

And unlike typical fluorescents, the 900-

lumen-output compact lamp has a low

color temperature of 3500°K and a high

Color Rendering Index of 82. It

generates a light that is quite similar to

an incandescent light source.

Fluorescent recessed fixtures are the

obvious choice for installations where

lighting is used continuously. Not only

does the long lamp life save on

relamping and maintenance, but the

cool operating temperature reduces air

conditioning loads.

R7F Features

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight No.12

(75°C) conductors permitted in box. The

R7FR is designed for end-of-run wiring.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can now slide anywhere

along the bar hanger, they are handy in

T-Bar ceilings where centering of the

fixture within the ceiling panel is

desired. One-piece 27 inch bar hangers

(RBH27) are available where required by

code for suspended ceiling or off-center

positioning installations.

Versatile plaster frame

Adaptable to new or existing ceilings.

For existing ceilings, remove bar

hangers and use RRC Remodel Clips.

6" Fluorescent Quad Tube (13W)

R7F New Construction

R7FR Remodel

R7F

New Construction

R7FR

Remodel

6.43"

7.5"

plaster frame

dimensions:

10.5"L x 7.25"W

7.25"

6.375 "

7.5"

6.75"

R Series Order Information

Lamp

Included!

NPPG 266

266

Adjustable socket

Socket plate is adjustable as required

for different trims.

Labels

Both housings are UL Listed in the US

and Canada for damp locations or wet

locations when used with RT13 style

trims. The R7F is UL Listed for feed-

through wiring; the R7FR for end-of-run

wiring.

Fixture rating

For line volt/amps, multiply total lamp

wattage by 1.25

NOTE: This fluorescent fixture cannot

be dimmed. See page 268 for a

fluorescent fixture that has a dimmable

ballast option.

www.ruudlighting.com

NPPG 267

NPPG 267

The ‘bright’ choice

is energy-efficient too

The words “compact fluorescent"

usually refer to the energy-efficient,

10,000-hour lamps produced by all the

major lamp suppliers. These two words

take on new meaning with the R7FT

two-lamp Compact Fluorescent

Downlight. At 5-1/2 inch high, this is

truly a “compact" Compact Fluorescent

fixture.

Shipped complete with two 3500º K,

13-watt quad lamps, this 1,800-lumen

output downlight makes an excellent

alternative to less-efficient incandescent

recessed fixtures (One 100W A19 lamp

produces 1,750 initial lumens).

The low-iridescent reflectors (no rainbow

effect) provide excellent visual cutoff and

are designed to maximize the light output

of the compact fluorescent lamp.

Features

Compact size

Only 5-1/2 inches high, the housing can

easily accommodate 2 x 6 wood joist

construction and tight soffit

installations. Accommodates up to 7/8-

inch maximum ceiling thickness.

Complete fixture

Shipped as one complete fixture, trim

is attached to rough-in module, saving

handling time. Catalog number includes

trim.

Trims

Computer-designed reflectors provide

maximum light output with minimum

fixture brightness and light source

visibility. The clear and gold trims are

low-iridescent reflectors, which

eliminate the rainbow reflections that

fluorescent lamps generate on standard

reflectors.

High power factor

magnetic ballasts

Type 1 potted ballasts minimize sound

and reduce line current, allowing more

fixtures on an individual circuit. Ballasts

are accessible from below ceiling and

are Class P, thermal protected.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC Article

410-66, if insulation is inadvertently

installed above or within 3 inches of

fixture.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight No.12

(75°C) conductors permitted in box.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can now slide anywhere

along the bar hanger, they are handy in

T-Bar ceilings where centering of the

fixture within the ceiling panel is

desired. One-piece 27-inch bar hangers

(RBH27) are available where required by

code for suspended ceiling or off-center

positioning installations.

Minimum starting

temperature

32°F (0°C) in open fixtures.

Labels

The R7FT is UL Listed in the US and

Canada for damp locations and feed-

through wiring. All trims are UL Listed

for damp locations.

NOTE: This fluorescent fixture cannot

be dimmed. See page 268 for a

fluorescent fixture that has a dimmable

ballast option.

267

6" Fluorescent Quad Tube (2-13W)

Lamps & Trim

Included!

R Series Order Information

6.43"

7.25"

plaster frame

dimensions:

10.5"L x 7.25"W

11.375"

5.5"

R7FT New Construction

Wattage/

Lamp Type Description

Volts Catalog #

(2)13W Fluorescent New Construction w/Clear Reflector 120 R7FT-1CL

Quad Tube New Construction w/Clear Reflector 277 R7FT-2CL

New Construction w/Gold Reflector 120 R7FT-1GD

New Construction w/Gold Reflector 277 R7FT-2GD

New Construction w/Baffle* & Reflector 120 R7FT-1BR

New Construction w/Baffle* & Reflector 277 R7FT-2BR

*Baffle color is black.

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . Pages 276–277

www.ruudlighting.com

NPPG 268

NPPG 268

Lamp

Included!

Order Information

Lamp

Included!

120 or 277V Power Line

Electronic Dimming*

ballast option

Operates from 2-wire compatible

dimmers. 100% to 5% continuous

dimming. Lamp ignition at any light

output setting.

120 or 277V Low Voltage

Dimming* ballast option

Operates from compatible 0-10V DC

controllers on Class 1 or Class 2 low

voltage systems. 100% to 5%

continuous dimming. Lamp ignition at

any lighting output setting.

Minimum starting

temperature

0°F (-18°C) in open fixtures.

R7F26/32

New Construction

R7FR26/32

Remodel

6.43"

7.5"

plaster frame

dimensions:

10.5"L x 7.25"W

7.25"

6.375 "

7.5"

6.75"

R Series Order Information

Wattage*/

Lamp Type

Description Volts Catalog #

(1)26W or (1)32W Fluorescent New Construction 120-277 R7F26/32

Triple Tube

Remodel** 120-277 R7FR26/32

*Specify 26W or 32W lamp wattage when ordering.

**Supplied with 4 remodel clips

Options: (Factory-installed) (commercial use only) Change Add to

Description

Suffix To Catalog #

0-10V Electronic Dimming Ballast (120 or 277V)

1 or 2 A

Power Line Electronic Dimming Ballast (120 or 277V) 1 or 2 P

Trims

Catalog #

Baffle w/Clear Reflector

RT18*

Reflector (Alzak

®

)

RT19F*

Wall Wash/Downlight

RT31*

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers (R7F only)

RBH27

T-Bar Clips (4) (R7F only) (use with RBH27)

RTBC

Oversize Metal Trim Ring (7-7/8" o.d.) (Not for use with RT18) ROTR

Remodel Clips (4) (R7F only)

RRC

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

10 times longer-lasting

than incandescent lamps

This compact fluorescent light is a

remarkable light source. With an

average rated life of 12,000 hours, it will

last 10 times longer than an ordinary

A19 incandescent lamp, while using

only one-fourth of the electricity.

Unlike typical fluorescents, the

1710–2200 lumen output compact lamp

has a color temperature of 3500ºK and a

high Color Rendering Index of 82.

Fluorescent recessed fixtures are the

obvious choice for installations where

lighting is used continuously. Not only

does the long lamp life save on

relamping and maintenance, but the

cool operating temperature reduces air

conditioning loads.

R7F Features

Adjustable housing

Adjusts up to 1-3/8 inch in plaster

frame to accommodate different ceiling

thicknesses.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight No.12

(75°C) conductors permitted in box.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can now slide anywhere

along the bar hanger, they are handy in

T-Bar ceilings where centering of the

fixture within the ceiling panel is

desired. One-piece 27-inch bar hangers

(RBH27) are available where required by

code for suspended ceiling or off-center

positioning installations.

Versatile plaster frame

Adaptable to new or existing ceilings.

For existing ceilings, remove bar

hangers and use RRC Remodel Clips.

R7F26/32 and R7FR26/32

Features

Electronic universal ballast

Microprocessor-controlled electronic

ballast automatically senses supply

voltage 120 volts through 277 volts.

Ballast is accessible from below the

ceiling and is Class P thermal protected.

Thermal protector

Fixture meets NEC Article 410-66

requirements.

Recommended for commercial use. The

electronic fluorescent ballast may not be

suitable for residential use; it produces

radio frequency interference (RFI) that

may affect televisions and radios.

6" Fluorescent Triple Tube (26W, 32W)

R7F26/32 New Construction

Lamp

Included!

R7FR26/32 Remodel

Adjustable socket

Socket plate is adjustable as required

for different trims.

Labels

Both housings are UL Listed in the US

and Canada for damp locations. The

R7F is UL Listed for feed-through

wiring; the R7FR for end-of-run wiring.

Trims are UL Listed for damp locations.

NOTE: For recommended dimming controls

see page 273.

268

www.ruudlighting.com

NPPG 269

NPPG 269

10 times longer-lasting

than incandescent lamps

This compact fluorescent light is a

remarkable light source. With an

average rated life of 10,000 hours, it will

last 10 times longer than an ordinary

A19 incandescent lamp, while using

only one-fourth of the electricity.

And unlike typical fluorescents, the

1150 lumen output compact lamp has a

low color temperature of 3500º K and a

high Color Rendering Index of 82. It

generates a light that is quite similar to

an incandescent light source.

Fluorescent recessed fixtures are the

obvious choice for installations where

lighting is used continuously. Not only

does the long lamp life save on

relamping and maintenance, but the

cool operating temperature reduces air

conditioning loads.

The R7FICAT18 is airtight!

Recessed downlights can create open

airways between temperature-controlled

rooms and their uncontrolled attic or

plenum spaces. Our Insulated Ceiling

Air Tight Recessed Downlight

(R7FICAT18) minimizes air infiltration

and leakage. This is especially useful in

states with codes requiring airtight

recessed fixtures.

R7FICAT Features

Double housing

Square galvanized housing surrounds a

round galvanized housing, providing an

excellent airtight thermal barrier.

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight No. 12

(75°C) conductors permitted in box.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can rigid bar hangers

now slide anywhere along the bar

hanger, they are handy in T-Bar ceilings

where centering of the fixture within the

ceiling panel is desired. One-piece 27-

inch bar hangers (RBH27) are available

where required by code for suspended

ceiling or off-center positioning

installations.

R7FICAT18 Features

Electronic universal ballast

Microprocessor-controlled electronic

ballast automatically senses supply

voltage 120 volts through 277 volts.

Ballast is accessible from below the

ceiling and is Class P thermal protected.

Minimum starting

temperature

0 degrees F (-18 degrees C) in open

fixtures.

Adjustable socket

Socket plate is adjustable as required

for different trims.

269

6" Fluorescent ICAT Triple Tube

Lamp

Included!

R Series Order Information

Labels

Housing is UL Listed for damp

locations, direct burial in insulation and

feed-through wiring. Trims are UL

Listed for damp locations.

Fixture rating

For line volt/amps, multiply total lamp

wattage by 1.25.

NOTE: The R7FICAT18 is a non-

dimmable* commercial grade product

using an electronic fluorescent ballast

(producing RFI and EMI) and may not

be suitable for residential use.

*See page 268 for a fluorescent fixture

that has a dimmable ballast option.

Wattage/

Lamp Type

Description Volts Catalog #

(1)18W Fluorescent ICAT New Construction 120–277 R7FICAT18

Triple Tube

Trims

Catalog #

Baffle w/Clear Reflector

RT18*

Reflector-low iridescent

RT19F*

Reflector

RT30*

Wall Wash/Downlight

RT31*

*Specify color

Accessories

Catalog #

Pair 27" Flat Bar Hangers

RBH27

T-Bar Clips (4)(use with RBH27)

RTBC

Oversize Metal Trim Ring (7-7/8" o.d.) (Not for use with RT18) ROTR

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

R7FICAT18

New Construction

6.43"

7.5"

plaster frame

dimensions:

11.5"L x 8.187"W

8.5"

www.ruudlighting.com

NPPG 270

NPPG 270

270

R Series Order Information

Emergency ballast

High-temperature, no maintenance

nickel cadmium battery, charger and

electronic circuitry enclosed in compact

case. Ballast does not affect normal

fixture operation, so downlight may be

either switched or unswitched. If

switched, an unswitched lead must be

connected to the emergency ballast.

Ballast is Class P, thermal protected,

50°F (10°C) minimum temperature.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC Article

410-66, if insulation is inadvertently

installed above or within 3 inches of

fixture.

R7FEM

Emergency

R7FTEM

Emergency

6.43"

7.5"

plaster frame

dimensions:

10.5"L x 7.25"W

6.43"

7. 25"

pla s t er f ram e

dim e ns ions :

10. 5"L x 7. 25"W

11.375"

5.5"

7 .5"

Wattage/

Lamp Type

Description

Volts Catalog #

(1)13W Fluorescent Emergency

120 R7FEM-1

Quad Tube

Emergency

277 R7FEM-2

(1)26W or (1)32W Emergency

120–277 R7F26/32EM

Fluorescent Triple Tube*

(2)13W Fluorescent Emergency w/Clear Reflector 120 R7FTEM-1CL

Quad Tube

Emergency w/Clear Reflector 277 R7FTEM-2CL

Emergency w/Gold Reflector 120 R7FTEM-1GD

Emergency w/Gold Reflector 277 R7FTEM-2GD

Emergency w/Baffle & Reflector 120 R7FTEM-1BR

Emergency w/Baffle & Reflector 277 R7FTEM-2BR

*Specify 26W or 32W lamp wattage when ordering.

Trims

Catalog #

Albalite Lens

RT25WH

Albalite Lens (regressed)

RT225*

Baffle w/Clear Reflector

RT18*

Drop Opal Lens (glass)

RT14WH

Drop Opal Lens (plastic) (Wet Listed)

RT13WH

Drop Opal Lens (regressed)

RT214*

Fresnel Lens

RT15WH

Fresnel Lens (regressed)

RT215*

Reflector

RT19F*

Wall Wash/Downlight

RT31*

Wall Wash/Scoop

RT21

*Specify color

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

Adjustable socket

Socket plate is adjustable as required

for different trims.

Labels and code compliance

The housing is UL Listed in the US for

damp locations and feed-through

wiring. The emergency ballast is UL

Listed for damp locations. Emergency

illumination meets and exceeds the

National Electric Code, NFPA Life Safety

Code and UL 90-minute requirements.

This emergency lighting

blends right in

Traditional two-lamp emergency lighting

fixtures can present design problems.

The Ruud

®

R7FEM incorporates

emergency lighting into a downlight,

eliminating the need for unattractive,

surface-mounted fixtures.

During normal power operation, Ruud

R7FEM fixtures operate as standard

fluorescent downlights. And because

they accommodate the same trims as

our R7F, they will match any R7F

downlights.

When a power interruption occurs, the

R7FEM emergency ballast is energized

by a nickel cadmium battery. This

maintains the 13-watt fluorescent lamp

in an emergency mode for a minimum

of 90 minutes.

When AC power is restored, the

emergency ballast automatically returns

to the charging mode.

To test the status of the emergency

mode during normal power operation,

the housing is supplied with a remote

switch plate that includes a test button

and LED indicator light.

Available in either 120 or 277 volts, the

R7FEM downlights are UL Listed.

R7FEM Features

Adjustable housing

Adjusts up to 7/8 inch in plaster frame

to accommodate different ceiling

thicknesses.

Oversized junction box

Designed for easy through-branch

circuit wiring. Box cover has a snap

latch for quick installation. Eight No.12

(75°C) conductors permitted in box.

Rigid bar hangers

These rigid bar hangers are for

use in 16 inch to 24 inch O.C. wood

joist or T-Bar construction. This design

permits sturdier installations that are

less prone to sagging. Because the

recessed fixture can now slide anywhere

along the bar hanger, they are handy in

T-Bar ceilings where centering of the

fixture within the ceiling panel is

desired. One-piece 27 inch bar hangers

(RBH27) are available where required by

code for suspended ceiling or off-center

positioning installations.

R7FEM Features

Electronic universal ballast

Microprocessor-controlled electronic

ballast automatically senses supply

voltage 120 volts through 277 volts and

also operates either 26-watt or 32-watt

triple-tube compact fluorescent lamps.

Ballast is accessible from below the

ceiling and is Class P thermal protected.

6" Fluorescent Emergency

R7FEM New Construction

Lamp

Included!

R7FTEM New Construction

www.ruudlighting.com

NPPG 271

NPPG 271

271

Emergency Fluorescent Battery Pack

EFBP Series Order Information

Options (factory-installed)

Description

Catalog Number

Emergency Battery Pack for

(1) 10-42W or (2) 10-26W 4-pin compact

fluorescent lamped recessed downlight

EFBP1-D65

Projects requiring retrofit of existing

recessed fluorescent downlights to add

emergency backup, the Fluorescent

Emergency Battery Pack (EFBP Series)

can provide easy installation and

reliability. The unit is capable of

providing power for one 10- to 42-watt

or two 10- to 26-watt compact

fluorescent lamps for 90 minutes of

emergency operation.

Imput Voltage

The EFBP Series accommodates 120- or

277-volt at 60-hertz with 3.5-watts.

Construction

The unit consists of a battery charger

and an inverter circuit in a single,

painted steel housing. The EFBP is

provided with a 3/8-inch flexible

armored cable for wiring to the fixture or

ballast compartment along with a

standard switch box containing the test

switch, charge light and battery

connector.

Lamps Operated

One 10- to 42-watt or two 10- to 26-

watt 4-pin, Rapid or Program Start

compact fluorescent lamps (including

Twin-, Triple-, Quad-Tube, 2D or

straight) can be operated for up to 90

minutes. A total of 650 initial lumens, or

325 lumens per lamp in a two-lamp

configuration, is available. The unit

features lamp selector leads for

optimizing light output for designated

lamp.

Battery

A long-life, high temperature Ni-cad

battery is provided.

Listings

The EFBP Series is UL 924 Listed in the

US for retrofit field installation, Life

Safety NFPA 101 and NEC/OSHA.

www.ruudlighting.com

NPPG 272

NPPG 272

272

6" HID

Lamp

Included!

R Series Order Information

R7M/S HID

A highly efficient

way to light up large

interior spaces

For applications that require HID light

sources, Ruud offers recessed cans in

medium-base high pressure sodium

and metal halide lamps.

If color is important, use MH lamps.

Warm-color MH lamps have a 3500°K

temperature, a CRI of 70, and a 7,500 to

15,000 hour life.

The development of low-wattage metal

halide lamps used with open fixtures

allows our RT18, RT30 and RT31 trims

to be UL Listed for use with 50, 70 or

100-watt MH lamps.

Features

Dual-voltage ballasts

R7M/S units include a high-reactance,

high-power factor 120/277 volt ballast,

which is Type 1, encased and potted.

Internal thermal protector is included.

Lamp included

The appropriate diffuse or coated HID

lamp is included in the housing price

and is shipped with the fixture.

Adjustable housing

Adjusts up to 1-3/8 inches in plaster

frame to accommodate different ceiling

thicknesses.

Oversized junction box

Designed for easy through-branch

circuit wiring. Eight No.12 (90°C)

branch circuit conductors permitted in

junction box. MH and HPS factory wired

for 277 volts and can be easily changed

for 120-volt operation.

27" bar hangers

RBH27 flat bar hangers are standard

with the R7M/S HID housings and can

be placed on the sides or the ends of the

plaster frame.

Thermal protector

Protects fixture from overheating if

incorrect lamp is used or, per NEC

Article 410-66, if insulation is

inadvertently installed above or within 3

inches of fixture.

Adjustable socket

Socket plate is adjustable as required

for different trims.

Labels

Housing is UL Listed in the US and

Canada for damp locations and feed-

through wiring.

Ballast Line Current

Starting

Operating

HID

Total Amps

Amps

Housing Watts 120V 277V 120V 277V

R7S05

65 0.70 0.35 0.65 0.30

R7S07

90 1.00 0.50 0.82 0.36

R7S10

125 1.50 0.65 1.10 0.50

R7M05

72 0.80 0.35 0.65 0.30

R7M07

94 0.53 0.27 0.85 0.37

R7M10

125 2.20 0.95 1.10 0.48

Wattage/

Lamp Type Description

Volts Catalog #

50W MH HID

120/277 R7M05

70W MH HID

120/277 R7M07

100W MH HID (use with open trims only) 120/277 R7M10

50W HPS HID

120/277 R7S05

70W HPS HID

120/277 R7S07

100W HPS HID (use with open trims only) 120/277 R7S10

Trims

Catalog #

Albalite Lens (70E17 max.)

RT25WH

Albalite Lens (regressed) (70E17 max.)

RT225*

Baffle w/Clear Reflector (100E17 max.)

RT18*

Drop Opal Lens (glass) (70E17 max.)

RT14WH

Drop Opal Lens (regressed) (70E17 max.)

RT214*

Fresnel Lens (70E17 max.)

RT15WH

Fresnel Lens (regressed) (70E17 max.)

RT215*

Reflector (100E17 max.)

RT30*

Wall Wash/Downlight (100E17 max.)

RT31*

*Specify color

Accessories

Catalog #

T-Bar Clips (4)

RTBC

Internal HID Reflector (use with RT14, RT15, RT25) RITRH

Oversize Metal Trim Ring (7-7/8" o.d.)

ROTR

(Not for use with RT18)

Trim Color Code: WH (White)

Reflectors Finish Code: CL (Specular Clear), GD (Specular Gold)

Baffles Color Code: WH (White), BK (Black)

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 273

Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 274–275

Photometrics and Coefficients of Utilization . . . . . . . . . . . . . . . . . . . . . . . Pages 276–277

R7M/S

HID

7.5"

6.43"

18"

plaster frame

dimensions: 18"L x 16"W

www.ruudlighting.com

Spread Lens

Catalog # Lampholder

TA081 MR16

1.9 inch diameter

Reduces concentric circles. Creates wide

beam pattern.

Linear Spread Lens

Catalog # Lampholder

TA082 MR16

1.9 inch diameter

Elongates beam pattern.

Remodel Clips (4)

Catalog #

RRC

For existing ceiling installations. Use to attach

plaster frame to ceiling. Order one set of four

per fixture. For use with R7, R7F, R7SH,

R7EIC, and R7L housings.

Oversize Trim Ring

Catalog #

ROTR

Metal Trim Ring 7-7/8 inch o.d.

For use when ceiling opening exceeds

7-1/4 inch diameter of standard trim ring.

Not for use with RT18 trim.

HID Internal Reflector

Catalog #

RITRH

Specular reflector for use with lens trims

installed in HID housings. Doubles fixture

efficiency.

27 inch Flat Bar Hangers

Catalog #

RBH27

For suspended ceiling or off-center

positioning installations.

Order one pair per fixture.

NPPG 273

Soft Focus Lens

Catalog # Lampholder

TA083 MR16

1.9 inch diameter

Reduces concentric circles. Maintains lamp’s

original beam pattern.

4" & 6" Recessed Fixtures—Accessories

Internal Trim Reflector

Catalog #

RITR

Doubles fixture efficiency. Use with Drop

Opal, Fresnel and Albalite trims when

installed in non IC incandescent and

fluorescent housings. Does not fit in

regressed trims.

Cutoff Baffle

Catalog # Lampholder

TA084 MR16

1.375 inch diameter x 1.25 inch L

Eliminates side glare, narrows wide flood.

T-Bar Clips (4)

Catalog #

RTBC

For use with RBH27 bar hangers. Order one

set of four per fixture.

Catalog # Dimmer Type

VA Rating Operating Voltage

RADS12DW Low voltage, 0-10V DC, Fluorescent Dimmer, for use 1200VA @ 120V or 120/277V

use with Advance Mark VII ballast or similar

1500VA @ 277V

RPDS61W Powerline Fluorescent Dimmer, for use with 600VA

120V

Advance Mark X ballast or similar

RPDS62W Powerline Fluorescent Dimmer, for use with 600VA

277V

Advance Mark X ballast or similar

RPDS101W Powerline Fluorescent Dimmer, for use with Mark X 1000VA

120V

ballast or similar

RPDS122W Powerline Fluorescent Dimmer, for use with Mark X 1200VA

277V

ballast or similar

273

Fluorescent Dimmer Switch

Commercial grade fluorescent ballast dimmer. White with preset slide and ON/OFF switch. Designed for single pole or 3-way operation (when used with 3-way switch). Compatible

with all Decora face plates (supplied by others).

www.ruudlighting.com

NPPG 274

NPPG 274

274

4" & 6" Recessed Trims—RT Series

Open

Metal Trim Ring (WH); 7-1/4" o.d.

Incandescent: 50R/PAR20 max.

Open

Metal Trim Ring (WH); 7-1/4" o.d.

Incandescent: 75BR/PAR30 max.

Open

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent: 150BR40/PAR38 max.

Incandescent IC: 75PAR38 max.

Drop Opal Lens

(plastic)

Plastic Trim Ring (WH); 8" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad, 26 or 32W Triple

UL Listed for wet locations

Drop Opal Lens

(glass)

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad

HID-MH/HPS: 70E17 max.

Fresnel Lens

(glass)

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad

HID-MH/HPS: 70E17 max.

Baffle

Metal Trim Ring (WH); 7-1/4" o.d.

Incandescent: 75BR/PAR30 max.

Incandescent IC:50PAR30 max. (Long Neck)

*Specify baffle color: WH or BK

Baffle

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 150BR40/PAR38 max.

Incandescent IC: 75PAR38 max.

*Specify baffle color: WH or BK

Baffle w/Clear Reflector

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 100A19

150BR40/PAR38 max.

Fluorescent: (1)13W Quad or 18,

26 or 32W Triple

HID-MH/HPS: 100E17 max.

*Specify baffle color: WH or BK

A Lamp Reflector (Alzak

®

)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 150A21 max.

*Specify reflector color: CL, GD or BK

Reflector (Alzak)

Low iridescent finish

Plastic Trim Ring (WH); 7-1/4" o.d.

Fluorescent: (1)13W Quad or 18,

26 or 32W Triple

*Specify reflector color: CL or GD

R Lamp Reflector (Alzak)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 75BR/PAR30 max.

*Specify reflector color: CL, GD or BK

Scoop Wall Wash

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad

Adjustable Eyeball

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent: 50R/PAR20 max.

NOTE: Can be aimed 35° and rotated 358°

Adjustable Eyeball

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent: 75BR/PAR30 max.

Incandescent IC: Long Neck

NOTE: Can be aimed 35° and rotated 358°

Albalite Lens

(glass)

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad

HID-MH/HPS: 70E17 max.

Aluminum Baffle

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 75BR/PAR30 max.

Incan. Shallow: 75PAR30 max.

Incan. IC Economy:50PAR30 max.

Incan. ICAT: 50PAR30 (Long Neck)

*Specify baffle color: WH or BK

Reflector (Alzak)

Metal Trim Ring (WH); 5" o.d.

Incandescent: 50R/PAR20 max.

*Specify reflector color: CL or GD

Reflector (Alzak)

Metal Trim Ring (WH); 5" o.d.

Incandescent: 50MR16BP max.

Adjustable

*Specify reflector color: CL or GD

Baffle

Metal Trim Ring (WH); 5" o.d.

Incandescent: 50R/PAR20 max.

*Specify baffle color: WH or BK

Baffle

Metal Trim Ring (WH); 5" o.d.

Incandescent: 50MR16BP max.

Adjustable

*Specify baffle color: WH or BK

R Lamp Reflector (Alzak)

Plastic Trim Ring (WH); 7" o.d.

Incandescent: 75PAR30 max.

*Specify reflector color: CL or GD

Reflector (Alzak)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 40A19 max.

Fluorescent: (1)18W Triple

HID-MH/HPS: 100E17 max.

*Specify reflector color: CL or GD

Wall Wash/Downlight

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 150A21

Fluorescent: (1)13 or 18W Quad

(1)26 or 32W Triple

HID-MH/HPS: 100E17 max.

*Specify reflector color: CL or GD

RT10WH

RT11WH

RT12WH

RT13WH

RT14WH

RT15WH

RT16*

RT17*

RT18*

RT19*

RT19F*

RT20*

RT21

RT22

RT23

RT25WH

RT26*

RT27*

RT30*

RT31*

RT40*

RT41*

RT45*

RT46*

Trim Ring Finish: WH (White); Reflector Finishes: CL (Specular Clear), GD (Specular Gold), BK (Specular Black);

Baffle Colors: WH (White), BK (Black)

www.ruudlighting.com

NPPG 275

275

Drop Opal Lens

(glass)

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent IC: 60A19 max.

Incan. IC Economy: 40A19 max.

Includes RITR Internal Trim Reflector (p. 273)

UL Listed for wet locations

Drop Opal Lens

(glass)

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent IC: 60A19 max.

Incan. IC Economy: 40A19 max.

Includes RITR Internal Trim Reflector (p. 273)

Fresnel Lens

(glass)

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent IC: 60A19 max.

Incan. IC Economy: 40A19 max.

Includes RITR Internal Trim Reflector (p. 273)

Baffle w/Clear Reflector

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent IC: 60A19

*Specify baffle color: WH or BK

R Lamp Reflector (Alzak)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent IC: 75BR/PAR30 max.

Incan. IC Economy: 50PAR30 max.

*Specify reflector color: CL, GD or BK

Scoop Wall Wash

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent IC: 40A19 max.

Albalite Lens

(glass)

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent IC: 60A19 max.

Incan. IC Economy: 40A19 max.

4" & 6" Recessed Trims—RT Series

Trim Ring Finish: WH (White); Reflector Finishes: CL (Specular Clear), GD (Specular Gold), BK (Specular Black);

Baffle Colors: WH (White), BK (Black)

Adjustable Spot

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent 50MR16 max.

Bi-pin base

*Specify baffle color: WH or BK

Adjustable Reflector

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent 50MR16 max.

Bi-pin base

*Specify reflector color: CL, GD or BK

Adjustable Eyeball

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent 50MR16 max.

Bi-pin base

*Specify baffle color: WH or BK

NOTE: Can be aimed 35° and rotated 358°

Adjustable Slot Aperture

Metal Trim Ring (WH); 7-7/8" o.d.

RT53

50MR16 max.

Bi-pin base

Pin-Hole Baffle

Metal Trim Ring (WH); 7-7/8" o.d.

Incandescent 50MR16 max.

Bi-pin base

*Specify baffle color: WH or BK

Adjustable Gimbal Ring

in Reflector

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent 50PAR36 max.

*Specify reflector color: CL, GD or BK

NOTE: Can be aimed 35° and rotated 358°

Adjustable Gimbal Ring

in Baffle

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent 50PAR36 max.

*Specify baffle color: WH or BK

NOTE: Can be aimed 35° and rotated 358°

Open

Metal Trim Ring (WH); 7-1/4" o.d.

RT111 65WBR30 max.

Regressed

Drop Opal Lens

(glass)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad

HID-MH/HPS: 70E17 max.

*Specify baffle color: WH or BK

Regressed

Fresnel Lens

(glass)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad

HID-MH/HPS: 70E17 max.

*Specify baffle color: WH or BK

Adjustable Regressed

Eyeball

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 75BR/PAR30 max.

*Specify baffle color: WH or BK

NOTE: Can be aimed 35° and rotated 358°

Regressed Albalite Lens

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent: 60A19 max.

Fluorescent: (1)13W Quad

HID-MH/HPS: 70E17 max.

*Specify baffle color: WH or BK

Regressed Drop Opal

Lens

(glass)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent IC: 40A19 max.

* Specify baffle color: WH or BK

Regressed Fresnel

Lens

(glass)

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent IC: 40A19 max.

* Specify baffle color: WH or BK

Regressed Albalite Lens

Plastic Trim Ring (WH); 7-1/4" o.d.

Incandescent IC: 40A19 max.

* Specify baffle color: WH or BK

Track Adaptor

Plastic Trim Ring (WH); 7-1/4" o.d.

Lamp varies with fixture

(Track fixture sold separately;

see pages 212–255)

RT50*

RT51*

RT52*

RT53

RT54*

RT55*

RT56*

RT111

RT113WH

RT114

RT115

RT118

RT120*

RT121

RT125

RT214*

RT215*

RT223*

RT225*

RT314*

RT315*

RT325*

RT400

www.ruudlighting.com

NPPG 276

NPPG 276

276

30

°

180

°

0

°

400

800

90

°

60

°

30

90

180

800

0

°

400

60

30

°

60

°

180

°

1200

0

°

800

90

°

400

30

°

60

°

90

°

180

°

A CROS S

4 5

AL ONG

0

°

30

°

60

°

90

°

120

°

400

800

1200

RT18 Baffle w/Reflector

100WA19 (1,750 Lumens)

S/MH = 0.9

SC = 0.9

Efficiency = 55.3%

RT19CL Reflector*

150WA21 (2,830 Lumens)

S/MH = 1.6

SC = 1.5

Efficiency = 69.5%

Recessed Photometrics—Incandescent

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .66 .66 .66 .66 .64 .64 .64 .64 .61 .61 .61 .59 .59 .59 .56 .56 .56 .55

1 .63 .61 .60 .59 .62 .60 .59 .58 .58 .57 .56 .56 .55 .55 .54 .53 .53 .52

2 .60 .57 .55 .54 .59 .56 .55 .53 .55 .53 .52 .53 .52 .51 .52 .51 .50 .49

3 .57 .54 .51 .49 .56 .53 .51 .49 .52 .49 .48 .50 .49 .47 .49 .48 .46 .46

4 .54 .50 .47 .45 .53 .50 .47 .45 .49 .46 .44 .47 .45 .44 .46 .45 .43 .43

5 .52 .47 .44 .42 .51 .46 .43 .41 .45 .43 .41 .45 .42 .41 .44 .42 .40 .39

6 .49 .44 .41 .39 .48 .44 .41 .38 .43 .40 .38 .42 .40 .38 .41 .39 .38 .37

7 .46 .41 .38 .36 .45 .41 .38 .35 .40 .37 .35 .39 .37 .35 .39 .36 .35 .34

8 .44 .38 .35 .33 .43 .38 .35 .33 .37 .35 .33 .37 .34 .32 .36 .34 .32 .31

9 .41 .36 .33 .30 .41 .36 .32 .30 .35 .32 .30 .35 .32 .30 .34 .32 .30 .29

10 .39 .33 .30 .28 .38 .33 .30 .28 .33 .30 .28 .32 .30 .28 .32 .29 .28 .27

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .83 .83 .83 .83 .81 .81 .81 .81 .77 .77 .77 .74 .74 .74 .71 .71 .71 .69

1 .78 .76 .74 .72 .76 .74 .73 .71 .71 .70 .69 .69 .68 .67 .66 .65 .65 .63

2 .73 .69 .66 .63 .72 .68 .65 .63 .66 .63 .61 .64 .62 .60 .62 .60 .59 .57

3 .68 .63 .59 .56 .67 .62 .58 .55 .60 .57 .54 .59 .56 .54 .57 .55 .53 .51

4 .64 .58 .53 .50 .63 .57 .53 .49 .55 .52 .49 .54 .51 .48 .52 .50 .47 .46

5 .60 .53 .47 .44 .58 .52 .47 .44 .50 .46 .43 .49 .46 .43 .48 .45 .42 .41

6 .55 .47 .42 .39 .54 .47 .42 .38 .46 .41 .38 .45 .41 .38 .44 .40 .38 .36

7 .51 .43 .37 .34 .50 .42 .37 .34 .41 .37 .33 .40 .36 .33 .39 .36 .33 .32

8 .47 .38 .33 .30 .46 .38 .33 .30 .37 .33 .29 .36 .32 .29 .36 .32 .29 .28

9 .43 .35 .30 .26 .42 .34 .29 .26 .34 .29 .26 .33 .29 .26 .32 .28 .25 .24

10 .40 .31 .26 .23 .39 .31 .26 .23 .30 .26 .23 .30 .25 .22 .29 .25 .22 .21

RT19CL Reflector*

100WA19 (1,750 Lumens)

S/MH = 0.8

SC = 0.8

Efficiency = 63.7%

RT31GD Wall Wash/

Downlight

150WA21 (2,850 Lumens)

S/MH = 1.6

SC = 1.6

Efficiency = 49.0%

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

* NOTE: Multiply chart values by 0.9 if RT19 specular gold reflector is used.

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .76 .76 .76 .76 .74 .74 .74 .74 .71 .71 .71 .68 .68 .68 .65 .65 .65 .64

1 .73 .71 .70 .68 .71 .70 .68 .67 .67 .66 .65 .65 .64 .63 .63 .62 .61 .60

2 .70 .67 .65 .63 .68 .66 .64 .62 .64 .62 .61 .62 .61 .59 .60 .59 .58 .57

3 .66 .63 .60 .58 .65 .62 .60 .58 .61 .58 .57 .59 .57 .56 .58 .56 .55 .54

4 .64 .59 .56 .54 .63 .59 .56 .54 .57 .55 .53 .56 .54 .52 .55 .53. .52 .51

5 .61 .56 .53 .50 .60 .55 .52 .50 .54 .52 .50 .53 .51 .49 .52 .50 .49 .48

6 .58 .53 .50 .47 .57 .53 .49 .47 .52 .49 .47 .51 .48 .46 .50 .48 .46 .45

7 .55 .50 .46 .44 .55 .50 .46 .44 .49 .46 .44 .48 .45 .43 .47 .45 .43 .42

8 .53 .47 .44 .41 .52 .47 .43 .41 .46 .43 .41 .45 .43 .41 .45 .42 .41 .40

9 .50 .44 .41 .38 .49 .44 .41 .38 .43 .40 .38 .43 .40 .38 .42 .40 .38 .37

10 .48 .42 .38 .36 .47 .42 .38 .36 .41 .38 .36 .41 .38 .36 .40 .38 .36 .35

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .58 .58 .58 .58 .57 .57 .57 .57 .54 .54 .54 .52 .52 .52 .50 .50 .50 .49

1 .55 .54 .52 .51 .54 .53 .51 .50 .51 .50 .49 .49 .48 .47 .47 .46 .46 .45

2 .52 .49 .47 .45 .51 .49 .47 .45 .47 .45 .44 .46 .44 .43 .44 .43 .42 .41

3 .49 .45 .43 .40 .48 .45 .42 .40 .43 .41 .39 .42 .40 .39 .41 .40 .38 .37

4 .46 .42 .39 .36 .45 .41 .38 .36 .40 .38 .36 .39 .37 .35 .38 .36 .35 .34

5 .43 .38 .35 .33 .42 .38 .35 .32 .37 .34 .32 .36 .34 .32 .35 .33 .31 .31

6 .40 .35 .32 .29 .39 .35 .31 .29 .34 .31 .29 .33 .31 .29 .32 .30 .28 .28

7 .37 .32 .28 .26 .37 .32 .28 .26 .31 .28 .26 .30 .28 .26 .30 .27 .25 .25

8 .35 .29 .26 .23 .34 .29 .26 .23 .28 .25 .23 .28 .25 .23 .27 .25 .23 .22

9 .32 .27 .23 .21 .32 .26 .23 .21 .26 .23 .21 .25 .22 .20 .25 .22 .20 .20

10 .30 .24 .21 .18 .29 .24 .21 .18 .23 .20 .18 .23 .20 .18 .23 .20 .18 .17

www.ruudlighting.com

NPPG 277

277

30

°

90

°

180

°

0

°

200

60

°

100

30

°

60

°

90

°

180

°

ACRO SS

4 5

A L ONG

0

°

30

°

60

°

90

°

120

°

100

200

300

30

°

180

°

0

°

90

°

60

°

400

200

200

400

0

°

30

°

60

°

90

°

180

°

ACROSS

45

ALONG

RT15/RITR

Fresnel/Internal Trim

Reflector

(1)13W Quad (900 Lumens)

S/MH = 1.4

SC = 1.3

Efficiency = 42.6%

(without RITR, efficiency is 22.9%)

RT31GD Wall Wash/

Downlight

(1)13W Quad (900 Lumens)

S/MH = 1.2

SC = 1.2

Efficiency = 39.5%

Recessed Photometrics—Fluorescent

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

RT19FCL Reflector*

(1)13W Quad (900 Lumens)

S/MH = 0.9

SC = 0.9

Efficiency = 56.5%

R7FT-1CL

Reflector

(2)13W Quads (1,800 Lumens)

S/MH = 0.8

SC = 0.8

Efficiency = 48.0%

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

* NOTE: Multiply chart values by 0.9 if RT19 specular gold reflector is used.

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .51 .51 .51 .51 .50 .50 .50 .50 .47 .47 .47 .45 .45 .45 .44 .44 .44 .43

1 .47 .46 .44 .43 .46 .45 .44 .42 .43 .42 .41 .41 .41 .40 .40 .39 .39 .38

2 .44 .41 .39 .37 .43 .40 .38 .36 .39 .37 .36 .38 .36 .35 .36 .35 .34 .33

3 .41 .37 .34 .32 .40 .36 .34 .32 .35 .33 .31 .34 .32 .31 .33 .31 .30 .29

4 .38 .34 .30 .28 .37 .33 .30 .26 .32 .29 .27 .31 .29 .27 .30 .28 .27 .26

5 .35 .30 .27 .25 .34 .30 .27 .24 .29 .26 .24 .28 .26 .24 .28 .25 .24 .23

6 .33 .28 .24 .22 .32 .27 .24 .22 .26 .24 .21 .26 .23 .21 .25 .23 .21 .20

7 .30 .25 .22 .19 .29 .25 .21 .19 .24 .21 .19 .23 .21 .19 .23 .20 .19 .18

8 .28 .23 .19 .17 .27 .22 .19 .17 .22 .19 .17 .21 .19 .17 .21 .18 .17 .16

9 .26 .21 .17 .15 .25 .20 .17 .15 .20 .17 .15 .19 .17 .15 .19 .17 .15 .14

10 .24 .19 .16 .14 .24 .19 .16 .14 .18 .15 .13 .18 .15 .13 .18 .15 .13 .13

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .47 .47 .47 .47 .46 .46 .46 .46 .44 .44 .44 .42 .42 .42 .40 .40 .40 .40

1 .45 .44 .43 .42 .44 .43 .42 .41 .41 .41 .40 .40 .39 .39 .39 .38 .38 .37

2 .43 .41 .39 .38 .42 .40 .39 .38 .39 .38 .37 .38 .37 .36 .37 .36 .35 .35

3 .40 .38 .36 .34 .40 .37 .36 .34 .36 .35 .34 .35 .34 .33 .35 .34 .33 .32

4 .38 .35 .33 .32 .38 .35 .33 .31 .34 .32 .31 .33 .32 .31 .33 .31 .30 .30

5 .36 .33 .30 .29 .36 .32 .30 .29 .32 .30 .28 .31 .29 .28 .30 .29 .28 .27

6 .34 .31 .28 .27 .34 .30 .28 .26 .30 .28 .26 .29 .27 .26 .29 .27 .26 .25

7 .32 .28 .26 .24 .32 .28 .26 .24 .28 .25 .24 .27 .25 .24 .27 .25 .24 .23

8 .30 .26 .24 .22 .30 .26 .24 .22 .26 .23 .22 .25 .23 .22 .25 .23 .22 .21

9 .28 .24 .22 .20 .28 .24 .22 .20 .24 .22 .20 .23 .21 .20 .23 .21 .20 .19

10 .27 .23 .20 .18 .26 .22 .20 .18 .22 .20 .18 .22 .20 .18 .22 .20 .18 .18

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .67 .67 .67 .67 .66 .66 .66 .66 .63 .63 .63 .60 .60 .60 .58 .58 .58 .56

1 .64 .63 .62 .60 .63 .62 .61 .60 .59 .59 .58 .57 .57 .56 .55 .55 .54 .53

2 .61 .59 .57 .55 .60 .58 .56 .54 .56 .55 .53 .54 .53 .52 .53 .52 .51 .50

3 .58 .55 .52 .50 .57 .54 .52 .50 .53 .51 .49 .51 .50 .48 .50 .49 .48 .47

4 .56 .51 .49 .46 .55 .51 .48 .46 .50 .47 .45 .49 .47 .45 .47 .46 .44 .44

5 .53 .48 .45 .42 .52 .48 .44 .42 .46 .44 .42 .46 .43 .42 .45 .43 .41 .40

6 .50 .45 .42 .39 .49 .45 .41 .39 .44 .41 .39 .43 .40 .39 .42 .40 .38 .38

7 .47 .42 .38 .36 .46 .41 .38 .36 .41 .38 .36 .40 .37 .35 .39 .37 .35 .35

8 .44 .39 .36 .33 .44 .38 .35 .33 .38 .35 .33 .37 .35 .33 .37 .34 .33 .32

9 .42 .36 .33 .30 .41 .36 .33 .30 .35 .32 .30 .35 .32 .30 .34 .32 .30 .29

10 .39 .34 .30 .28 .39 .33 .30 .28 .33 .30 .28 .32 .29 .28 .32 .29 .27 .27

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .57 .57 .57 .57 .56 .56 .56 .56 .53 .53 .53 .51 .51 .51 .49 .49 .49 .48

1 .54 .53 .51 .50 .53 .52 .50 .49 .49 .49 .48 .48 .47 .46 .46 .45 .45 .44

2 .51 .48 .46 .44 .50 .47 .45 .44 .46 .44 .43 .44 .43 .42 .43 .42 .41 .40

3 .48 .44 .41 .39 .47 .43 .41 .39 .42 .40 .38 .41 .39 .38 .40 .38 .37 .36

4 .45 .41 .37 .35 .44 .40 .37 .35 .39 .36 .34 .38 .36 .34 .37 .35 .34 .33

5 .42 .37 .34 .31 .41 .37 .33 .31 .36 .33 .31 .35 .32 .31 .34 .32 .30 .29

6 .39 .34 .30 .28 .38 .33 .30 .28 .33 .30 .28 .32 .29 .27 .31 .29 .27 .26

7 .36 .30 .27 .25 .35 .30 .27 .24 .29 .26 .24 .29 .26 .24 .28 .26 .24 .23

8 .33 .28 .24 .22 .33 .27 .24 .22 .27 .24 .22 .26 .24 .22 .26 .23 .21 .21

9 .31 .25 .22 .19 .30 .25 .22 .19 .24 .21 .19 .24 .21 .19 .23 .21 .19 .18

10 .29 .23 .19 .17 .28 .23 .19 .17 .22 .19 .17 .22 .19 .17 .21 .19 .17 .16

www.ruudlighting.com

NPPG 278

NPPG 278

278

1000

2000

0

°

30

°

60

°

90

°

180

°

30

°

60

°

180

°

1000

3000

2000

0

°

90

°

RT30 Reflector

70W HPS (5,985 Lumens)

S/MH = 1.6

SC = 1.5

Efficiency = 67.9%

Recessed Photometrics—HID

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

RT215/RITRH

Fresnel/Internal HID

Reflector

70W MH (5,600 Lumens)

S/MH = 0.4

SC = 0.4

Efficiency = 44.4%

Coefficients of Utilization

Effective Floor Cavity Reflectance = 0.20

Tested in accordance with IES procedures. Test Distance = 8 meters (26 ft.)

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .81 .81 .81 .81 .79 .79 .79 .79 .75 .75 .75 .72 .72 .72 .69 .69 .69 .68

1 .76 .74 .71 .70 .74 .72 .70 .68 .69 .68 .66 .67 .65 .64 .64 .63 .62 .61

2 .71 .67 .64 .61 .70 .66 .63 .60 .63 .61 .59 .61 .59 .57 .59 .58 .56 .55

3 .66 .60 .56 .53 .65 .59 .56 .52 .58 .54 .52 .56 .53 .51 .54 .52 .50 .49

4 .61 .55 .50 .47 .60 .54 .50 .46 .53 .49 .46 .51 .48 .45 .50 .47 .45 .43

5 .57 .50 .45 .41 .56 .49 .44 .41 .48 .44 .40 .46 .43 .40 .45 .42 .40 .38

6 .53 .45 .40 .36 .52 .44 .39 .36 .43 .39 .36 .42 .38 .35 .41 .38 .35 .34

7 .49 .40 .35 .32 .48 .40 .35 .31 .39 .34 .31 .38 .34 .31 .37 .34 .31 .30

8 .45 .37 .31 .28 .44 .36 .31 .28 .35 .31 .28 .35 .30 .27 .34 .30 .27 .26

9 .42 .33 .28 .24 .41 .33 .28 .24 .32 .27 .24 .31 .27 .24 .31 .27 .24 .23

10 .38 .30 .25 .21 .38 .30 .25 .21 .29 .24 .21 .28 .24 .21 .28 .24 .21 .20

CC 80

70

50 30 10 0

WALL 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

RCR

0 .53 .53 .53 .53 .52 .52 .52 .52 .49 .49 .49 .47 .47 .47 .45 .45 .45 .44

1 .50 .49 .47 .46 .49 .48 .46 .45 .46 .45 .44 .44 .43 .43 .43 .42 .41 .41

2 .47 .45 .43 .41 .46 .44 .42 .40 .42 .41 .39 .41 .40 .39 .40 .39 .38 .37

3 .44 .41 .38 .36 .43 .40 .38 .36 .39 .37 .35 .38 .36 .35 .37 .36 .34 .34

4 .41 .38 .35 .33 .41 .37 .35 .32 .36 .34 .32 .35 .33 .32 .34 .33 .31 .30

5 .39 .35 .31 .29 .38 .34 .31 .29 .33 .31 .29 .32 .30 .29 .32 .30 .28 .28

6 .36 .32 .29 .27 .36 .31 .28 .26 .31 .28 .26 .30 .28 .26 .29 .27 .26 .25

7 .34 .29 .26 .24 .33 .29 .26 .24 .28 .25 .24 .28 .25 .23 .27 .25 .23 .23

8 .32 .27 .24 .22 .31 .26 .24 .21 .26 .23 .21 .26 .23 .21 .25 .23 .21 .20

9 .30 .25 .22 .20 .29 .24 .22 .20 .24 .21 .19 .24 .21 .19 .23 .21 .19 .19

10 .28 .23 .20 .18 .27 .23 .20 .18 .22 .19 .18 .22 .19 .18 .21 .19 .17 .17

www.ruudlighting.com